Ring Central VoIP Inbound Outbound SIP Trunk Configuration in Vicidial

Ring Central VoIP Inbound Outbound SIP Trunk

Enter Below in sip.conf

[general]
externip = 10.0.0.1    ;external server IP (Public IP)
realm = 10.0.01       ;external Server IP
domain = 10.0.0.1     ;external Server IP
srvlookup = yes
registertimeout=200
registerattempts=3

#Create Carrier 

register => username@sip.ringcentral.com:password:AuthID@sip10.ringcentral.com:5090/username

[rc]
; route to a proper context to handle incoming calls for extension username or other DIDs of the RingCentral account:
context = incoming_RC
type = friend
host = sip10.ringcentral.com
insecure = port,invite
disallow = all
allow = ulaw
qualify = no

[username]
type = peer
host = sip.ringcentral.com
transport=udp
defaultuser=Auth ID       ; Authentication username for outbound proxies
username = Auth ID
fromuser=Username           ; Many SIP providers require this
fromdomain=sip.ringcentral.com
secret = password
canreinvite = no
disallow = all
allow = ulaw
nat = yes
dtmfmode = auto
rfc2833compensate = yes
trustrpid = yes
usereqphone = yes              ; This provider requires ";user=phone" on URI
callcounter = yes              ; Enable call counter for parallel outbound calls
busylevel = 2                  ; Signal busy at 2 or more calls (feel free to adjust)
outboundproxy=sip10.ringcentral.com:5090

#Dialplan String

exten => _XXX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _XXX.,2,Dial(SIP/${EXTEN:X}@username,45,tToR)
exten => _XXX.,3,Hangup